Siemens 00H941 Addressable Cerberus Pro Dual Heat/Smoke detector head

Description

These detectors were miss ordered and not used during an installation. They have been programmed with addresses. However at your request either the detector address can be removed or I will provide any requested address, programmed and labeled, for the detector(s). These detectors have never been powered up on a fire system and are brand new.
The detector is very versatile, and meets the following fire-industry standards:
• Multi-criteria fire detector ( UL 268)
• Heat detector ( UL 521) with five (5) possible field-selectable temperatures; combined with four (4) rate-of-rise options
• Direct, in-duct (plenum) detector ( UL 268A)
• Supervisory monitoring for temperature ranges
• NFPA 76 (Telco Standard) as VEWFD
• Low-temperature warning signal at 40°F (4.4°C)
─ for sprinkler systems, per NFPA 25 / NFPA 72
Field-selectable temperature settings
Model OOH941 provides five (5) field-selectable temperature thresholds, ranging from 135°F to 175°F (57°C to 79°C), with fixed and rate-of-rise options. These ranges provide maximum flexibility to program and to easily adjust the temperature settings that suit multi-application needs with a building or in changing environmental conditions. Additionally, Model OOH941 can be configured to provide a low-temperature warning signal at 40°F (4.4°C). This configuration (along with connection to a compatible fire-alarm control panel [FACP]) meets NFPA 72 requirements for sprinkler-temperature monitoring, and serves to prevent water freezing inside pipes, relative to water-based suppression systems.
Profile Overview
Each Model OOH941 intelligent detector contains one (1) tri-color LED indicator, capable of flashing any one (1) of three (3) distinct colors: GREEN, YELLOW, or RED. During each flash interval, the microprocessor-based detector monitors the following:
• Smoke in its sensing chamber
• Smoke sensitivity is within the range indicated on the nameplate label
• Internal sensors and electronics
This detector requires a Siemens DB-11 Smoke detector Base.