Plasma Cutter 50Amp Non-Touch CUT50DP 1/2" Clean Cut 110/220V IGBT DC Inverter

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
Product description
ZS-MICTEK ZS-CUT50DP
Air plasma cutting technology  Plasma cutters work by passing an electric arc through a air/gas that is passing through a constricted opening. The gas can be air, nitrogen, argon, oxygen. etc. The electric arc elevates the temperature of the gas to the point that it enters a 4th state of matter. We all are familiar with the first three: i.e.,Solid, liquid, and gas. Scientists call this additional state plasma. As the metal being cut is part of the circuit, the electrical conductivity of the plasma causes the arc to transfer to the work. The restricted opening (nozzle) the gas passes through causes it to squeeze by at a high speed, like air passing through a venturi in a carburettor. This high speed gas cuts through the molten metal.
Plasma cutting was invented as the result of trying to develop a better welding process. Many improvements then led to making this technology what it is today. Plasma cutters provide the best combination of accuracy, speed, and afford ability for producing a variety of flat metal shapes. They can cut much finer, and faster than oxy-acetylene torches.
￫【Non-touch CUT50DP】
Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
￫【DUAL Voltage Input
】
Automatic Dual Voltage capability allows the machine to run directly on 110V/220V, plug adapters included,use conversion line easy transfer from 110V to 220V Home Use,Panel setup is very simple. rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
￫【Duty Cycle】
Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A duty cycle pilot arc air plasma cutter with high frequency inverter( no compressor inside).[recommended to choose 50A circuit breaker protection when your power supply voltage is 110V, and 30A circuit breaker protection when 220V.]
￫【Cutting Performance 】
Suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. 1/2” ideal clean cut and 3/4” maximum severance, widely used at demanding industrial and construction work, or home and hobby for us.
￫【High-quality accessories 】
The plasma cutters use a better air regulator,We offer a full range of quality accessories, work with standard parts, you easy to find the consumables from our shop.Buy with confidence as we offer 30-day 100% satisfaction or money back guarantee and 3-year limited warranty.
Technical specifications
TYPE
ZS-CUT50DP
ZS-CUT50P
Input power voltage (V)
AC115，50/60Hz
AC220，50/60Hz
AC220，50/60Hz
Rated input current (A)
45
40
40
Rated power capacity (KVA)
4.3
6.5
6.5
Current adjustment range (A)
20-35
20-45
20-45
Welding thickness (mm)
Carbon Steel≤12.0
Stainless Steel≤12.0
Aluminum≤8.0
Copper≤4.0
Carbon Steel≤16.0
Stainless Steel≤16.0
Aluminum≤10.0
Copper≤6.0
Carbon Steel≤16.0
Stainless Steel≤16.0
Aluminum≤10.0
Copper≤6.0
Voltage adjustment range (V)
94V
98V
98V
No-load voltage (V)
280±20
280±20
280±20
Rated duty cycle
60%
60%
60%
Efficiency (%)
80%
80%
80%
Power factor
0.7
0.7
0.7
Protection class
IP21S
IP21S
IP21S
Insulation class
F
F
F
Size (mm)
490*290*340
490*290*340
490*290*340
Weight (Kg)
9.6
9.6
9.6
Cutting Thickness Chart
Need to adjust the current and air pressure properly under metal thickness to get
best cutting surface.
1
ZS-CUT50DP -220V
20Amps
35Amps
40Amps
45Amps
50Amps
Thickness (mm)
5mm
8mm
10mm
12mm
15mm
Air Pressure (psi)
40-50psi
40-50psi
50-60psi
60-70psi
60-70psi
2
ZS-CUT50DP -110V
20Amps
30Amps
35Amps
Thickness (mm)
5mm
6mm
8mm
Air Pressure (psi)
40-50psi
40-50psi
50-60psi
Buy this you can get High-quality Complete accessories:
1*plasma cutter torch (4m)
1*Earth clamp with cable(2m)
1*Conversion line (20cm)
3*Electrode
1*Leak-proof tape
1*Pressure reducing valve bracket
3*nozzle
2*Pressure reducing valve accessories
4*Hose clamp+1 *Air hose(2m)
1*Wrench
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We can ONLY accept PayPal payments.
All major credit cards are accepted through the secure payment processor PayPal.
2. Payment must be received 7 days after the auction ends.
Unpaid disputes are filed on eBay for non-payable buyers.
3. Import duties, taxes and charges are not included in the item price or shipping cost.
These charges are the buyer's responsibility.
4. Remote areas need to pay additional shipping.
Delivery details
1. Shipping cost: Click the shipping and payment tab on the product detail page to see the delivery details.
You can calculate the shipping cost by entering the required information.
2. Transit time: The transit time varies depending on the shipping method.
3. Item Processing Time: The processing time for a specific order depends on the product type and stock status.
Mostly, processing time can be 2 working days.
Terms of sales
1.60 days  free store warranty:
All our product offer 60 days free warranty time,during this period,if our item got quality problem.We will exchange or replace item for customers without any fee.
2. 3 years store warranty:
All our product got 1 year store warranty,after 60 days free store warranty.During this time,if our item got quality problem,we can offer exchange or repair.But buyer need to pay the ship back fee when we pay the re-ship fee.
3. 1 week Return:
All our item offer 7 days return peroid,defective or non-defective. Return must include all original package and accesorries, item must in good condition.
Defective item: customers first pay the shipping fee and ship back the item, we check and confirm, then we will offer full refund and the ship back fee.
Non-defective item: 7 days Unconditional return, buyer need to pay the ship back fee, and we will offer refund your payment, but not include shipping fee.
4. Please do contact us first by ebay message before any return or case.
About us
*
Full Digital Control System
S
mart Design with full digital control ,Constant voltage and synergic
adjustment control.
*
Production Control System
F
ully implement the ISO9001:2008 quality management system.
*
100% Quality Control Test
Each Machine with 100% QC Test , Life Test and Welding Function Test.
*
Factory Management Control
Over 10 years factory control system focus on the welding field.
Contact us
1.Please be patient when contacting us, all messages will be replied within 24 hours.
2.Please let us know immediately if a package is damaged upon arrival.
3.Feel free to contact us if you’d like to combine shipping on your purchases.
4.We appreciate your positive five stars feedback and we will send buyers positive feedback after a shipment has been processed.
5.Customer satisfaction is significant to us. If you are dissatisfied with a transaction for any reason. Before taking any action, please contact us through eBay and we will do everything we can to help you.
On Jun-28-21 at 23:36:06 PDT, seller added the following information: