Plasma Cutter 50 amps Pilot Arc Dual Input Voltage 120/240 Tested Works Great

Description

SLIGHTLY USED so its appearance refects that.
The photos shown are not the actual machine you will receive as its is a bit dusty and a couple of small dents other than that its the same. I TESTED IT BEFORE PACKAGING IT UP AND IT WORKS GREAT.
CUT50DP is Pilot Arc 50Amps Plasma Cutter.
Features:
●This Plasma Cutter with pilot arc function, Made of high quality parts. Adopt Advanced IGBT inverter soft switch technology.
●It is one of the most portable single phase 50/60Hz inverter cutting machines in market.
●This machine very easy to operate in terms of settings, Machine designed 120/240V input voltage. This cutter can automatically indicate the input power from 90V-260V(120V/240V)
●Air pressure meter built on front of machine, easy and simple reading.
●This plasma cutter with LCD current display stronger handle.
●The cutting thickness is 12mm 65psi under 220V in good performance, 8mm 50PSI under 110V. Severance cutting thickness can reach at 18mm if needed for a slow run.
●This plasma cutter is widely cutting range for Stainless Steel, Alloy Steel, Mild Steel, Copper, Iron, Aluminum etc.
●Pilot Arc function very easy to cut Painted, Rust, Dust metal.
Specifications
Input voltage: 90V-260V (120/240V) 50/60Hz
Current range: 20A-50A
Arc starting；Non contact (pilot arc)
Insulation Class: B
No Load Voltage: 48V
Rated input capacity: 4.8 KVA
Rated duty cycle: 60% at 50A, 100% at 40A
Quality cutting thickness: 12mm Max Cutting thickness: 18mm if needed for a slow run
Torch Length: 4M
Earth Cable Length: 2.5M
Packing dimensions: 14.2*6.1*13 Inch
What in the Package:
1 x Plasma Cutter (fixed 110V power plug, includes adapter for 240 volt connection. )
1 x 4M Pilot Arc Cutting torch
1 x Air Regulator (Air meters fit on front of machine)
1 x 1.5M earth clamp
2 x extra electrodes
2 x extra tips
1x manual