Nichrom 2.4869 Heating Wire Fep And Glass Fibre Ni80Cr20 Insulated Resistance

Description

Nichrome 2.4869 heating wire FEP and fiberglass Ni80Cr20 insulated resistance wire
Nichrome 2.4869 heating wire FEP and fiberglass Ni80Cr20 insulated resistance wire
Do you need a different steel quality or dimension? Please write to us. Our sales team makes an offer from stock program or delivery program :)
Length tolerance +/-2mm
Important: Sheet metal cuts are not suitable for decorative or visible areas. Scratches not excluded. Pure industrial quality surface. Cut with scissors. Not all sheets in protective film. Please inquire separately if surface quality is relevant to you - we will try to find a solution for you.
TOP quality at fair prices
High-quality products made to measure and cut to size
Competent advice & service
Technical data:
Brand:
Evek
Manufacturer number:
Not applicable
Type:
wire
Material:
Nichrome
Norm classifications:
Material number:
2.4869
Alloy:
80/20
US:
N06003
Description:
Production time - none. Already in stock.
Shipping preparation - 2-3 working days.
Please look at the FAQ.
There are 2 types of insulation available:
Glass fiber (Q-glass fiber), temperature 600℃;
FEP (Fluorinated ethylene propylene), temperature 200℃;
Characteristics
:
Material Type
Continuous operating temp. / ℃
wear and tear
resistance
Chemical resistance
Moisture resistance
solvent
resistance
Flame protection
FEP
200
excellent
excellent
excellent
excellent
excellent
Q-glass
600
appropriate
good
good
excellent
excellent
Nickel-chromium (NiCr) is an alloy of nickel, chromium and, in rare cases, iron. A well-known alloy consists of 80% nickel and 20% chromium. This alloy is called Nichrome 80/20. It is an excellent conductor, a metal with a much higher resistance than other insulators. Most commonly it is used as a resistance wire in toasters and heaters, but also in some dental prosthetics (fillings) and some other applications. Since its resistivity is significantly higher than that of copper or aluminum, the resistance of this metal is high enough to achieve a useful value with minimal dimensions. Other alloys contain nickel, chromium and iron in varying proportions.
Because nickel-chromium is very wear-resistant, it is often used to create durable coatings for both decorative and technical purposes. Nickel-chromium alloys are used e.g. B. commonly used in aircraft turbines because of their durability, heat resistance and general toughness.
Insulated Ni80Cr20, insulated FEP 200°C diameter with insulation and tolerance are shown in brackets
0.15mm (0.32mm ±0.03)
0.2mm (0.45mm ±0.03)
0.3mm (0.64mm ±0.03)
0.4mm (0.77mm ±0.03)
0.5mm (0.91mm ±0.03)
0.6mm (1.06mm ±0.03)
0.8mm (1.37mm ±0.03)
1mm (1.91mm ±0.03)
Ni80Cr20, Fiberglass Insulation 600℃ (Fiberglass), Fiber Type: Q-Fiberglass Diameter with insulation and tolerance are shown in brackets
0.15mm (0.65mm ±0.03)
0.2mm (0.66mm ±0.03)
0.3mm (0.74mm ±0.03)
0.4mm (1.46mm ±0.03)
0.5mm (1.48mm ±0.03)
0.6mm (1.55mm ±0.03)
0.8mm (1.63mm ±0.03)
1mm (1.74mm ±0.03)
documentation
Data sheet (German)
Listing and template services provided by inkFrog
Important: Sheet metal cuts are not suitable for decorative or visible areas. Scratches not excluded. Pure industrial quality surface. Cut with scissors. Not all sheets in protective film. Please inquire separately if surface quality is relevant to you - we will try to find a solution for you. Nickel-chromium (NiCr) is an alloy of nickel, chromium and, in rare cases, iron. A well-known alloy consists of 80% nickel and 20% chromium. This alloy is called Nichrome 80/20. It is an excellent conductor, a metal with a much higher resistance than other insulators. Most commonly it is used as a resistance wire in toasters and heaters, but also in some dental prosthetics (fillings) and some other applications. Since its resistivity is significantly higher than that of copper or aluminum, the resist