-40%
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.
CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.

CUT-50HF, 50A Plasma Cutter, Non-touch Pilot Arc, 100V~250V, 3/5 in. Clean Cut.

$ 210.67

Availability: 600 in stock
  • Item Type: Plasma Cutter
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Return shipping will be paid by: Seller
  • MPN: ACUT50HF2020
  • Gas Pressure Range: 30 PSI ~ 90 psi
  • Movement Speed: 12.5 in./min
  • Cutter Current Range: 230V/20-50 Amp, 115V/20-30 Amp
  • Condition: New
  • Duty Cycle @ 104F(40c): 60% @ 50 Amp
  • Inlet Flow: 4.5 scfm @ 90 psi
  • Input Amperage: 230V/37 Amp, 115V/40 Amp
  • Power Source: AC 95-260V / 50-60Hz
  • Brand: Amico Electric
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days

    Description

    CUT-50HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20-50 amps Plasma Cutter Machine with
    advanced inverter technology and high cutting performance
    . Designed for portable repair work and small business project use, CUT-50HF Air Plasma Cutter cuts a thickness of 3/5 in., and the max severance thickness is 1.0 in.
    Incorporates advanced
    Non-touch pilot arc cutting
    technology, with an
    excellent Arc stability. Very
    easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
    Can cut up to 3/5 in.
    stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals,
    resulting in
    straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
    95~260V wide voltage, 50/60Hz,
    almost all of the voltage and frequency can be used,
    and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
    Quick setup:
    NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor.
    The filter is located inside the machine with an
    automatic air control solenoid valve.
    Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, and fan dormancy.
    Specifications:
    Type:
    Non-touch Pilot Arc
    Plasma Cutter
    Supply Power: 95~260V, 50/60Hz, 1-Phase
    Rated Input Current: 230V/37 Amp, 115V/40 Amp
    Cutter Current Range: 230V/20-50 Amp, 115V/20-30 Amp
    Nominal DC Open Circuit Voltage: 280-Volt
    Output Voltage: 100-Volt
    Duty Cycle @104F(40c): 60% @ 50 Amp
    Efficiency: 89%
    Power factor: 0.93
    Output Terminal Type: Direct Wire
    Cooling Method: Fan Air Cooled
    Gas Supply
    :
    Clean
    D
    ry
    O
    il-
    F
    ree
    A
    ir
    Gas
    Pressure
    Range
    :
    30
    -
    90
    psi
    Recommended Gas Inlet Flow
    :
    4.5scfm @ 90 psi
    Maximum Severance Cutting Thickness: 1.0 in.
    Movement Speed: 12.5 in./min
    Net Weight: 24.8 lbs.
    Product Size: 19.0 x 7.6 x 12.9 in.
    Package Weight: 34.4 lbs.
    Shipping Size: 20.0 x 12.6 x 14.8 in.
    Package Included:
    CUT-50HF
    Non-touch Pilot Arc
    Plasma Cutter Machine
    13 Feet (SG-55/AG-60) Plasma Cutter Torch Gun Assembly
    10 Feet 300A Work Clamp Assembly, 35-50mm Lead Dines
    230V to 115V Power Adapter
    Air Filter and Pressure Gage (Installed inside the machine)
    Owner’s Manual.