4PC 1/4''1/2''Shank T-Slot Milling Cutter T-Track Slotting Carbide Wood Milling

Description

T-Slot Keyhole Cutter Wood Router Bit 1/4" 1/2" Shank Carbide Cutter For Wood Hex Bolt T-Track Slotting Milling Cutters
Short Description:
T-slot router bits are great for creating T-channels for jig and clamp applications and keyholes for hanging projects. It is recommended that a straight groove, matching width to the upper part of the "T", be cut into the workpiece prior to routing the T-slot to reduce the stress on the bit. T-slot cuts produce a lot of wood chips with little room for them to escape and can cause the bit to get bogged down. Go easy on the feed and back off every couple of inches before resuming with the cut.
Specification:
Type: Key Hole Router Bit
Meterial: Carbide
Shank: 1/4'' 1/2''
Cutting Diameter: 3/8'' 1/2''
Note:
Please allow 1-3mm error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Package Including:
4pcs T-Slot Router Bit
On Nov-23-20 at 21:59:05 PST, seller added the following information: