20pcs DIY Design Iron on Denim Fabric Patches Clothing Jeans Repair Kit 10Colors

Description

HTVRONT Iron on Patches for Clothing Repair, Fabric Patches Iron on, Repair Decorating Kit 20 Pieces Iron on Patch
📡
Usage method:
1.Wash garment before applying patch. Before the patch placed, keep the surrounding area clean and free of thread debris.
2.Home Iron: Turn your iron on ''Cotton'' or set iron to 330℉.
3.Repair Hole: Cut patch slightly larger than area to be mended (around 2 cm or more to ensure the bond is firm ) Place a piece of paper between the two layers old jeans before applying patch, so they do not get stick together.
4.Working on a firm, protected surface, use iron/heat press to preheat area of garment where patch will be placed. Place the patch on the desired part of your garment and cover the patch with teflon or other cover sheet. (Never apply hot iron directly to patch )
5.Ensure shiny side down on garment.
6.Home Iron: Iron the front side of the patches firmly for 40s and iron the back side of the patches firmly for 30s with heavy pressure .
7.Please make sure the edges are ironed firmly. if not, please repeat ironing.(Free sewing needles and threads we provided you )
📡
Precautions
: for cloth stickers with sequins, beads, water drills, silk flowers, and wool balls, as well as cloth stickers embroidered with metal wire, they should be ironed from the reverse side first, and then the corners should be trimmed from the front side after the cloth stickers are fixed firmly, so as not to damage the sequins or other ornaments on the front side. Clothes (or other textiles) should be kept dry. When ironing, do not use iron to spray water on cloth stickers or clothes.
After pressing, the cloth can be closely combined with clothes (or other textiles) for a long time. If the cloth falls off after a period of time or falls off after washing, it means that the iron temperature is low during ironing, or the ironing time is too short
📡
Note
:
Fabric or other textiles should be dry. It is not necessary to wet the plaster or cloth during ironing.
The ironing of ironing can take a long time. If the time falls later or after washing, it means that the ironing temperature is too low or the ironing time is too short. You can reload the iron-on patch using the steps above.